# Why DB9 male on the device?

**URL:** <https://forum.opencyphal.org/t/why-db9-male-on-the-device/400>\
**Category:** Development & Maintenance\
**Created:** [March 19, 2019, 6:39am UTC](https://forum.opencyphal.org/t/why-db9-male-on-the-device/400 "2019-03-19T06:39:34Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![arrowcircle](https://forum.opencyphal.org/user_avatar/forum.opencyphal.org/arrowcircle/32/173_2.png) [@arrowcircle](https://forum.opencyphal.org/u/arrowcircle)\
**Post date:** [March 19, 2019, 6:39am UTC](https://forum.opencyphal.org/t/why-db9-male-on-the-device/400/1 "2019-03-19T06:39:34Z")

</div>

Hi! It’s really interesting why UAVCAN uses male DB9 connector on the device and not on cable side?  
There are few downsides of this decision:

1. Short circuit on power source devices is possible when using male connector if something goes to the connector.
2. Pins can be damaged and it will be harder, than just change cable

What are other advantages/disadvantages?

---

<div class="post-metadata">

**Author:** ![pavel.kirienko](https://forum.opencyphal.org/user_avatar/forum.opencyphal.org/pavel.kirienko/32/9_2.png) [@pavel.kirienko](https://forum.opencyphal.org/u/pavel.kirienko)\
**Post date:** [March 19, 2019, 8:01am UTC](https://forum.opencyphal.org/t/why-db9-male-on-the-device/400/2 "2019-03-19T08:01:16Z")

</div>

This connector standard is defined to be compatible with CiA 303 part 1 – Cabling and connector pin assignment. Here is a relevant excerpt for reference.

 ![Screenshot_20190319_095930](https://forum.opencyphal.org/uploads/default/original/1X/adab9448e2a442b60b584b3f592bb50e784eb6f5.png)

---

<div class="post-metadata">

**Author:** ![arrowcircle](https://forum.opencyphal.org/user_avatar/forum.opencyphal.org/arrowcircle/32/173_2.png) [@arrowcircle](https://forum.opencyphal.org/u/arrowcircle)\
**Post date:** [March 19, 2019, 8:31am UTC](https://forum.opencyphal.org/t/why-db9-male-on-the-device/400/3 "2019-03-19T08:31:14Z")

</div>

Thanks for the info, but they don’t mention reasons. Any ideas about that?

---

<div class="post-metadata">

**Author:** ![pavel.kirienko](https://forum.opencyphal.org/user_avatar/forum.opencyphal.org/pavel.kirienko/32/9_2.png) [@pavel.kirienko](https://forum.opencyphal.org/u/pavel.kirienko)\
**Post date:** [March 19, 2019, 8:35am UTC](https://forum.opencyphal.org/t/why-db9-male-on-the-device/400/4 "2019-03-19T08:35:12Z")

</div>

I don’t really know that, but it could be that the male pins on cables are more likely to sustain mechanical damage while the cable is not connected.

---

<div class="post-metadata">

**Author:** ![antoine.albertelli](https://forum.opencyphal.org/user_avatar/forum.opencyphal.org/antoine.albertelli/32/14_2.png) [@antoine.albertelli](https://forum.opencyphal.org/u/antoine.albertelli)\
**Post date:** [March 20, 2019, 1:43pm UTC](https://forum.opencyphal.org/t/why-db9-male-on-the-device/400/5 "2019-03-20T13:43:55Z")

</div>

I dont know if that is the reason, but it is the same on RS232 connectors, so maybe it was a compatibility thing ?
