# Unable to get the service uavcan.node.Getinfo to Work

**URL:** <https://forum.opencyphal.org/t/unable-to-get-the-service-uavcan-node-getinfo-to-work/1748>\
**Category:** Libcanard\
**Created:** [September 6, 2022, 6:53am UTC](https://forum.opencyphal.org/t/unable-to-get-the-service-uavcan-node-getinfo-to-work/1748 "2022-09-06T06:53:17Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![pavel.kirienko](https://forum.opencyphal.org/user_avatar/forum.opencyphal.org/pavel.kirienko/32/9_2.png) [@pavel.kirienko](https://forum.opencyphal.org/u/pavel.kirienko)\
**Post date:** [September 6, 2022, 11:28am UTC](https://forum.opencyphal.org/t/unable-to-get-the-service-uavcan-node-getinfo-to-work/1748/5 "2022-09-06T11:28:38Z")

</div>

This may be relevant:

> [@UAVCAN/CAN: tx buffer management in CAN (FD) controllers](https://forum.opencyphal.org/t/uavcan-can-tx-buffer-management-in-can-fd-controllers/1215):
>
> tl;dr: do not rely on the tx buffer management services provided by your CAN controller. Make your driver manage the transmission order in software instead. Otherwise, you will run into either a priority inversion problem or data loss caused by frame reordering. I just ran a quick survey of the TX buffer management capabilities offered by the following products: [TI TCAN4550](https://www.ti.com/product/TCAN4550) — standalone CAN FD controller chip [Microchip ATSAM D5x/E5x](https://www.microchip.com/wwwproducts/en/ATSAME51N19A) (FD-capable) FDCAN & bxCAN macrocells by ST Microelectroni…

---

_[View the full topic](https://forum.opencyphal.org/t/unable-to-get-the-service-uavcan-node-getinfo-to-work/1748)._
