# FD CAN Development Board / Kit - Testing

**URL:** <https://forum.opencyphal.org/t/fd-can-development-board-kit-testing/1970>\
**Category:** General\
**Created:** [August 29, 2023, 10:08pm UTC](https://forum.opencyphal.org/t/fd-can-development-board-kit-testing/1970 "2023-08-29T22:08:16Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![aentinger](https://forum.opencyphal.org/user_avatar/forum.opencyphal.org/aentinger/32/1428_2.png) [@aentinger](https://forum.opencyphal.org/u/aentinger)\
**Post date:** [August 30, 2023, 5:10pm UTC](https://forum.opencyphal.org/t/fd-can-development-board-kit-testing/1970/4 "2023-08-30T17:10:13Z")

</div>

Hi @jackorton32 ☕ 👋

I’m happy you’ve followed through with building actual hardware 😉 . As you mention PlatformIO, are you planning to utilize [107-Arduino-Cyphal](https://github.com/107-systems/107-Arduino-Cyphal)?

@pavel.kirienko : I’m not sure which board you refer too, there is [OpenCyphalPicoBase](https://forum.opencyphal.org/t/opencyphalpicobase-a-node-with-raspberry-pi-pico-and-mcp2515/1764/13) with an Ardunio firmware stack which is CAN only at the moment, and there’s [Pika Spark](https://docs.pika-spark.io/) (sorry, no official picture yet 😁 ) which has **1 x 1000BASE-T, 1 x 10BASE-T1S, 2 x CAN/CAN FD, 2 x RS485, WiFi and IMU** but is rather a fully fleged micro robot control unit running Linux and ROS (and not bare-metal).

Looking forward to see this project evolve. Hardware supported CAN/CAN FD (i.e. not via SPI connected transceiver) is certainly the right choice to make.

---

_[View the full topic](https://forum.opencyphal.org/t/fd-can-development-board-kit-testing/1970)._
