# Dynamic Node allocation \[Legacy v0\]

**URL:** <https://forum.opencyphal.org/t/dynamic-node-allocation-legacy-v0/1206>\
**Category:** Applications & Usage\
**Created:** [April 21, 2021, 9:16am UTC](https://forum.opencyphal.org/t/dynamic-node-allocation-legacy-v0/1206 "2021-04-21T09:16:42Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Tommy](https://forum.opencyphal.org/letter_avatar_proxy/v4/letter/t/b5a626/32.png) [@Tommy](https://forum.opencyphal.org/u/Tommy)\
**Post date:** [April 21, 2021, 9:16am UTC](https://forum.opencyphal.org/t/dynamic-node-allocation-legacy-v0/1206/1 "2021-04-21T09:16:42Z")

</div>

Hello there, I am attempting to speak to a Hex Here3 GPS/IMU.  
I am currently using a CAN/USB converter that isnt compatable with SLCAN.

As I understand it, the Here3 is transmitting an annonomous message using the CANID 0x189A7100,  
with the 0x18 being the priority, the 0x9A71 being the discriminator with the message ID of 1 being read from the last 2 bits of the dicriminator. 0x00 being the node/being annonymous.  
Am I correct in assuming the device is requesting a dynamic node allocation?

The attached image shows my attempt to send it a node ID, (well 0x00 following the example from this page: [6. Application level functions - UAVCAN](https://legacy.uavcan.org/Specification/6._Application_level_functions/) )

 ![image](https://forum.opencyphal.org/uploads/default/original/1X/ba00091dad5e2641afad48317e76f775c3b5f263.png)

I believe the key is 0x30 30 35 20 04 57 42 52 3e 00 29 00.  
Can you see any issues with what is currently being sent/recieved as I’m not getting passed the 2nd stage?

I appreciate your time reading this and thank you for your help.  
Thanks  
Tom

---

<div class="post-metadata">

**Author:** ![pavel.kirienko](https://forum.opencyphal.org/user_avatar/forum.opencyphal.org/pavel.kirienko/32/9_2.png) [@pavel.kirienko](https://forum.opencyphal.org/u/pavel.kirienko)\
**Post date:** [April 21, 2021, 3:03pm UTC](https://forum.opencyphal.org/t/dynamic-node-allocation-legacy-v0/1206/2 "2021-04-21T15:03:22Z")

</div>

> [@Tommy](#):
>
> As I understand it, the Here3 is transmitting an annonomous message using the CANID 0x189A7100,  
> with the 0x18 being the priority, the 0x9A71 being the discriminator with the message ID of 1 being read from the last 2 bits of the dicriminator. 0x00 being the node/being annonymous.  
> Am I correct in assuming the device is requesting a dynamic node allocation?

Yes, this sounds right (one minor technical note: the discriminator is only 14 bits long though; the next 2 bits are the message ID which is a separate field).

> [@Tommy](#):
>
> Can you see any issues with what is currently being sent/recieved as I’m not getting passed the 2nd stage?

Not immediately but I recommend you to compare your implementation with that of the UAVCAN GUI Tool. Can you do that?
