# Communicating with a MAD COMPONENTS AMPX ESC

**URL:** <https://forum.opencyphal.org/t/communicating-with-a-mad-components-ampx-esc/2389>\
**Category:** CLI tools (Cynic/Yakut)\
**Created:** [May 20, 2025, 3:41am UTC](https://forum.opencyphal.org/t/communicating-with-a-mad-components-ampx-esc/2389 "2025-05-20T03:41:37Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![scottnortman](https://forum.opencyphal.org/user_avatar/forum.opencyphal.org/scottnortman/32/1707_2.png) [@scottnortman](https://forum.opencyphal.org/u/scottnortman)\
**Post date:** [May 20, 2025, 3:41am UTC](https://forum.opencyphal.org/t/communicating-with-a-mad-components-ampx-esc/2389/1 "2025-05-20T03:41:38Z")

</div>

Hardware: Rpi 4B + Bullseye 32 Bit + Waveshare CAN HAT

Connected to a MAD Components AMPX 200A v2 with CyphalCAN support

I am able to see the device with  
$ yukut monitor

 ![image](https://forum.opencyphal.org/uploads/default/original/2X/9/9bd85ca33467585b105f9431bef496ff52ea80a6.png)

Additionally, the manufacturer provides a [datasheet](https://forum.opencyphal.org/uploads/short-url/amOtvL5OkyllaE2deGusP2q4fh4.pdf) with the Register information.

How can I create DSDL configuration files to read/write the data?

---

<div class="post-metadata">

**Author:** ![pavel.kirienko](https://forum.opencyphal.org/user_avatar/forum.opencyphal.org/pavel.kirienko/32/9_2.png) [@pavel.kirienko](https://forum.opencyphal.org/u/pavel.kirienko)\
**Post date:** [May 20, 2025, 5:42am UTC](https://forum.opencyphal.org/t/communicating-with-a-mad-components-ampx-esc/2389/2 "2025-05-20T05:42:38Z")

</div>

Please contact the manufacturer. The mentioned controller implements a custom, vendor-specific protocol that is inspired by Cyphal/CAN, but is not compatible.

---

<div class="post-metadata">

**Author:** ![scottnortman](https://forum.opencyphal.org/user_avatar/forum.opencyphal.org/scottnortman/32/1707_2.png) [@scottnortman](https://forum.opencyphal.org/u/scottnortman)\
**Post date:** [May 20, 2025, 11:48am UTC](https://forum.opencyphal.org/t/communicating-with-a-mad-components-ampx-esc/2389/3 "2025-05-20T11:48:14Z")

</div>

Thank you Pavel.

Can you provide any insight? They are not being responsive.

---

<div class="post-metadata">

**Author:** ![pavel.kirienko](https://forum.opencyphal.org/user_avatar/forum.opencyphal.org/pavel.kirienko/32/9_2.png) [@pavel.kirienko](https://forum.opencyphal.org/u/pavel.kirienko)\
**Post date:** [May 20, 2025, 11:52am UTC](https://forum.opencyphal.org/t/communicating-with-a-mad-components-ampx-esc/2389/4 "2025-05-20T11:52:43Z")

</div>

Consider switching to a different supplier.

You can find a similar discussion here: [Esp32 / arduino control ESC with 107 Arduino Cyphal library](https://forum.opencyphal.org/t/esp32-arduino-control-esc-with-107-arduino-cyphal-library/2300)

If you manage to get in touch with the manufacturer, please send them a link to this thread and let them know that I would like to help them implement the Cyphal support properly.

---

<div class="post-metadata">

**Author:** ![scottdixon](https://forum.opencyphal.org/user_avatar/forum.opencyphal.org/scottdixon/32/39_2.png) [@scottdixon](https://forum.opencyphal.org/u/scottdixon)\
**Post date:** [May 21, 2025, 1:31am UTC](https://forum.opencyphal.org/t/communicating-with-a-mad-components-ampx-esc/2389/5 "2025-05-21T01:31:19Z")

</div>

Indeed. While imitation may be a form of flattery it appears MAD would do well to verify their compatibility before advertising support for Cyphal. I’m sorry they did this to you @scottnortman .
