# CAN LED Indicator

**URL:** <https://forum.opencyphal.org/t/can-led-indicator/1570>\
**Category:** Applications & Usage\
**Created:** [January 18, 2022, 4:37pm UTC](https://forum.opencyphal.org/t/can-led-indicator/1570 "2022-01-18T16:37:24Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![SMEA](https://forum.opencyphal.org/letter_avatar_proxy/v4/letter/s/47e85d/32.png) [@SMEA](https://forum.opencyphal.org/u/SMEA)\
**Post date:** [January 18, 2022, 4:37pm UTC](https://forum.opencyphal.org/t/can-led-indicator/1570/1 "2022-01-18T16:37:24Z")

</div>

Hi I’m just getting started with AP\_Periph to create a UAVCAN node, so please excuse my blanks in understanding. I’m using an f103 board and have been able to get the GPS working with the prebuilt binaries and by following the guide to build my own. My question is how do I get indicator LEDs through the CAN node to have external LEDs on my system? Do i need an LED driver or can I just set some gpios in HWdef to achieve this?

---

<div class="post-metadata">

**Author:** ![auturgy](https://forum.opencyphal.org/user_avatar/forum.opencyphal.org/auturgy/32/845_2.png) [@auturgy](https://forum.opencyphal.org/u/auturgy)\
**Post date:** [January 18, 2022, 8:18pm UTC](https://forum.opencyphal.org/t/can-led-indicator/1570/2 "2022-01-18T20:18:23Z")

</div>

Better to ask AP\_Periph questions in the CANBus channel at the ardupilot discord: [https://ardupilot.org/discord](https://ardupilot.org/discord)
