# BMS: Set mode via UAVCAN

**URL:** <https://forum.opencyphal.org/t/bms-set-mode-via-uavcan/884>\
**Category:** General\
**Created:** [July 21, 2020, 4:43pm UTC](https://forum.opencyphal.org/t/bms-set-mode-via-uavcan/884 "2020-07-21T16:43:23Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![raulrff](https://forum.opencyphal.org/letter_avatar_proxy/v4/letter/r/e68b1a/32.png) [@raulrff](https://forum.opencyphal.org/u/raulrff)\
**Post date:** [July 21, 2020, 4:43pm UTC](https://forum.opencyphal.org/t/bms-set-mode-via-uavcan/884/1 "2020-07-21T16:43:23Z")

</div>

For the BMS, I’d like to have the FC set different modes.  
Examples:

- Set overcurrent mode (enabled/disabled)
- Enable/disable self-heating
- Enable/disable self-discharge
- Acknoledge (reset) faults

---

<div class="post-metadata">

**Author:** ![pavel.kirienko](https://forum.opencyphal.org/user_avatar/forum.opencyphal.org/pavel.kirienko/32/9_2.png) [@pavel.kirienko](https://forum.opencyphal.org/u/pavel.kirienko)\
**Post date:** [July 21, 2020, 5:42pm UTC](https://forum.opencyphal.org/t/bms-set-mode-via-uavcan/884/2 "2020-07-21T17:42:13Z")

</div>

Thanks, Raul, this is acknowledged. I will incorporate this into the upcoming update to the message definitions, stay tuned – updates will follow on this forum.
